|
Gamajet Case Studies

When it comes tank cleaning, performance says it all. The following are real examples of how Gamajet has resolved various tank cleaning problems. Whether your tank cleaning is a standard application or requires a unique approach, Gamajet can provide an answer. As the world leader in tank cleaning technology, we believe that for every soil there is a solution.
Dairy Application: Improved Spray Dryer Cleaning In Early 2009 a major dairy cooperative was struggling with two challenges, first how to clean a spray dryer transfer duct in a more thorough manner and do so in less time...
Read More
Pharmaceutical Application: Surge Tank Cleaning A pharmaceutical company in Pennsylvania called Gamajet with a unique application. This company was updating a bottling line for a liquid children’s cold medicine. The update included the addition of a filling/surge tank used in the bottling line...
Read More
Chemical Reactor Application: Making a Messy Job Easier and Greener A specialty chemical company in Australia needed to reduce the time and water needed to clean their chemical process tanks. The current method of boiling out the reactor by filling the vessel with hot water and caustic or solvent was taking too long…
Read More
Plant Operations Application: Using Mobile CIPs to Achieve Breakthroughs A Personal Care products plant uses Gamajet cleaning machines and a mobile CIP unit as the solution to accommodate a new product, meet quality and sanitation requirements and save significant money...
Read More
Open Top Trailer Application: Making a Dangerous Messy Job Safer
Every rendering plant is faced with the same messy job of cleaning the offal trailers. The job is not only unpleasant but can be dangerous. Many plant managers must also meet stringent odor and waste-water control regulations...
Read More
Processing Application: Unique Problems Call For Unique Solutions Just before the New Year, a flavoring manufacturer with plants in over 30 countries contacted Gamajet with a challenge. They had hundreds of reservoirs ranging from 125 to 550 gallons that were very difficult to clean. Each tank contained concentrated liquids...
Read More
Fuel Storage Application: Back to Business After Running Afoul of an Ethanol Blend In the Fall of 2007 a shipment of ethanol blended fuel started an expensive and frustrating period for a gas station owner in the Albany, New York area. The problem was caused by the ethanol, a solvent, taking the dirt and sludge that had built up inside the tank for more than ten years and causing it to suspend into the fuel...
Read More
Municipal Application: A Better Way to Clean Lift Stations
At the 2009 Pump Cleaner Ryland Holmes of Virginia Public Works Equipment was looking for a better way to clean lift stations. His customers in the Tidewater area were struggling with grease problems in their lift stations and needed an effective way to resolve their issues without demanding more of their manpower or budget...
Read More
|