Gamajet All-In-One Flex

Clean From the Top and Never Turn Another Barrel 

Now you can clean your barrels in place without the need to move them. The Gamajet All-In-One FLEX is the perfect way to clean your barrel without moving or unstacking them. Incorporating a specially designed Gamajet All-In-One, flexible vacuum assembly and custom machined vacuum head, the new FLEX provides easy insertion into barrels stacked more than two high in either racks or pyramids.

High Performance 360º impingement cleaning, scours the barrel interior, at a controlled pressure in order to maintain the integrity of the barrel, while an integrated vacuum extracts the liquid. The vacuum is powerful enough to extract the lees and gives you the option of using it to rack the wine.  

Other Specifications: 

Inlet Connection: 0.5” NPT-Female

Construction/Design: Parts are machined from 316-L Stainless Steel investment castings or bar stock.

Impeller & Final Shaft: For increased wear resistance, the input shaft is plasma-sprayed with a Chromium Oxide coating on Stainless Steel.

Shaft & Gearbox Bushings: Turbine shaft thrust is absorbed by a Tungsten carbide bushing. Gear bushings are carbon filled polyphenylene sulfide.

Bearing Cups: Main body castings are protected by replaceable 316-L Stainless Steel cups for extended frictional wear life.

Static Seals: O-Ring materials are selected for each application. EPDM is standard with Kalrez and Viton available. Other materials can be supplied on special order.

Dynamic Seals and Bearings: Rotary shaft and housing seals/bearings are spring-loaded, double-lipped and made of PTFE.They are reinforced for extra long wear and protection against leakage, abrasion and deposit build-up.

Nozzles: Standard nozzle sizes 0.060 (1.5 mm), 0.070 (1.7 mm) 0.075 (1.9 mm), 0.080 (2.0 mm).Other nozzle sizes are available upon request.

Drive Mechanism: The wash fluid enters the Gamajet at the inlet collar where it encounters and spins turbine blades. The turbine blades are attached to the top of the drive or rotor shaft. The bottom of this shaft is connected to the inside of a sealed, robust planetary gearhead which then turns the body in the horizontal plane and the nozzles in the vertical plane. 

Planetary Gearhead: The sealed planetary gearhead has an external casing made of steel, surface-anodized to become stainless. This sealed gearhead is located inside the gearbox, which itself is sealed, and thus does not require any lubricant. All internal gearhead parts are hardened sintered steel.

Lubricant: Food grade grease is inside the sealed gearhead casing.

Operating & Maintenance: Complete operating and maintenance procedures are covered in a detailed instruction manual furnished with all machines. Ready availability of spare parts or kits, and ease of on-site maintenance minimizes the need for repairs. Prompt factory overhaul or repair service is always available. Replacement parts are stocked year round. Special 24-48 hour delivery available upon request at no extra charge.

Warranty: Gamajets are warranted for eighteen months from the date of shipment against any defects in workmanship or materials. Normal maintenance parts such as O-rings, bearings, bushings, and seals are not included under this warranty, nor is damage caused by dropping, use of destructively corrosive fluids, or other abuse.This warranty shall not apply to any malfunction resulting from use of non-Gamajet replacement parts purchased from any source other than Gamajet or an authorized Gamajet distributor. For full details, see Gamajet “Terms and Conditions of Sale”.

Testimonial:

"We are a owner of the Gamajet All-in-one Flex and are very happy with its performance. Before we had your product we used a low pressure hot water spin nozzle to clean our barrels. This method was not doing the job.  After reviewing a number of cleaning heads we choose the All-in-one Flex head because:

1. The methodical cleaning pattern. This was easy to see when we cleaned our plastic totes.  We observed just how well the all-in-one Flex covered all areas of the vessel.
2. The amount of debris/water color we observed when the vacuum system pulled the water from the barrel.  We weren't getting all of the titrates removed with the old system.
3. The short amount of time it takes to clean and empty each barrel, about 4-5 minutes total.

We are more confident today then ever that our barrels will be ready for the next batch of wine and there is no doubt our wines will be better from this point on.

Thanks for producing a great product!
Bill Heritage - Heritage Vineyards of Richwood
Owner

Gamajet All-in-One Flex Data Sheet (Coming Soon)

Gamajet All-in-One Engineering Diagrams (Coming Soon)

Gamajet All-in-One Performance Charts (Coming Soon)