Alfa Laval Gamajet 9.2

Operating Range:

Pressure:  50 to 100 PSI (3.5 to 6.9 bar) 

Temperature: 32° to 180°F (0° to 82°C)

Flow Rate: 6 to 20 GPM (23 to 76 l/min) 

Cleaning Radius: 10' (3 Meters)

Wash Cycle Time: 3-20 Minutes

Impact: 7 lbs (3 kg) at 5' (1.5 m)

Overall Dimensions:

Height: 20" (508 mm)

Body Diameter: 1.9" (48.26 mm)

Weight: 5.5 lb (2.5 kg)

Clearance: 2" (50.8 mm) minimum passageway I.D. 


This is also a fuel polishing machine, however GASOLINE CANNOT be run through this machine. Most other fuel types are acceptable, especially diesel.  


Other Specifications: 

Inlet Connection: 0.75” NPT-Female

Construction/Design: Parts are machined from 316-L Stainless Steel investment castings or bar stock.
Impeller & Final Shaft: For increased wear resistance, the input shaft is plasma-sprayed with a Chromium Oxide coating
on Stainless Steel.

Shaft & Gearbox Bushings: Turbine shaft thrust is absorbed by a Tungsten carbide bushing. Gear bushings are carbon filled polyphenylene sulfide.

Static Seals: O-Ring materials are selected for each application. EPDM is standard, with Viton and Kalrez available. Other materials can be supplied on special order.

Dynamic Seals and Bearings: Rotary shaft and housing seals/bearings are spring-loaded, double-lipped and made of PTFE.They are reinforced for extra long wear and protection against leakage, abrasion and deposit build-up.

Nozzles: Nozzle sizes from 0.100" (2.54 mm) to 0.200" (5.08 mm)

Drive Mechanism: The wash fluid enters the Gamajet at the inlet collar where it encounters and spins turbine blades. The turbine blades are attached to the top of the drive or rotor shaft. The bottom of this shaft is connected to the inside of a sealed, robust planetary gearhead which then turns the body in the horizontal plane and the nozzles in the
vertical plane.

Planetary Gearhead: The sealed planetary gearhead has an external casing made of steel, surface-anodized to become stainless. This sealed gearhead is located inside the gearbox, which itself is sealed, and thus does not require any lubricant. All internal gearhead parts are hardened sintered steel.

Lubricant: Food-grade grease is inside the sealed gearhead casing.

Operating & Maintenance: Complete operating and maintenance procedures are covered in a detailed instruction manual furnished with all machines. Ready availability of spare parts or kits, and ease of on-site maintenance minimizes the need for repairs. Prompt factory overhaul or repair service is always available. Replacement parts are stocked year round. Special 24-48 hour delivery available upon request at no extra charge.

Warranty: Gamajets are warranted for eighteen months from the date of shipment against any defects in workmanship or materials. Normal maintenance parts such as O-rings, bearings, bushings, and seals are not included under this warranty, nor is damage caused by dropping, use of destructively corrosive fluids, or other abuse.This warranty shall not apply to any malfunction resulting from use of non-Gamajet replacement parts purchased from any source other than Gamajet or an authorized Gamajet distributor. For full details, see Gamajet “Terms and Conditions of Sale”.



Benefits:

Fits through a 2” (50 mm) opening

Cleans standard ASTs up to 1,250 gallons (4,750 l) in capacity

Powerful: 7 lbs (3 kg) of cleaning force at 5’ (1.5 m)

Operates at lower pressures

 

Alfa Laval Gamajet 9.2 PD Sheet Download

Resources:

Engineering Diagrams

Gamajet GentleJET Toftejorg TZ-74 Toftejorg TJ-20G Toftejorg 3-A Rotary Sprayheads Toftejorg Sanijet20

 

 

Copyright 2018 Alfa Laval Inc. All Rights Reserved.