Global Quicklinks

Gamajet 8

GAMAJET EZ-8 Technical Specs

Operating Range:

Pressure: 20 to 1000 PSI (1.4 to 69 bar) 

Temperature: 32° to 250°F (0° to 121°C)

Flow Rate: 25 to 130 GPM (94.6 to 492 l/min) 

Cleaning Radius: 35' (10.67 Meters)

Wash Cycle Time: 8 Minutes

Impact: 40 lbs (18 kg) at 25' (7.5 m)


Overall Dimensions:

Height: 11" (279.4 mm)

Body Diameter: 2.88" (73.152 mm)

Weight: 15 lb (6.8 kg)

Clearance:

Pin Drive: Dual: 8.5" (215.9 mm)

Triple: 7.75" (196.85 mm)

Clutch Drive: Dual: 4.75" (120.65 mm)

     Triple: 6.75" (171.45 mm) 


Other Options:

Directional Units

High Impact Nozzles

Other Specifications: 

Inlet Connection: 1 1/2" NPT-Female / 2" Quick-Disconnect Male

Construction/Design: Parts are machined from 316-L Stainless Steel investment castings or bar stock.

Impeller & Final Shafts: For increased wear resistance, the input and output shafts are plasma-sprayed with a Chromium Oxide coating on Stainless Steel.

Shaft & Gearbox Bushings: Input shaft thrust is absorbed by a Tungsten carbide bushing. Gearbox bushings are carbon-filled Teflon or other non-cupric material.

Bearings: Bearings in the rotating tee and nozzle housings are self-lubricating, carbon-fiber-reinforced polyphenylene sulfide.

Bearing Cups: Main body castings are protected by replaceable 316-L Stainless Steel cups for extended frictional wear life.

Static Seals: O-Ring materials are selected for each application. Viton® is standard with Kalrez®, Zalak® and EPDM available. Other materials can be supplied on special order.

Dynamic Seals: Rotary shaft and housing seals are spring-loaded, double-lipped and made of PTFE. They are reinforced for extra long wear and protection against leakage, abrasion and deposit build-up.

Nozzles: Standard nozzle sizes 1/4" (6.35 mm), 9/32" (7.14 mm), 5/16" (7.94 mm), 3/8" (9.53 mm), 7/16" (11.11 mm) 1/2" (12.10 mm). Other nozzle sizes available upon request.

Drive Mechanism: The wash fluid enters the Gamajet at the inlet collar where it encounters and spins turbine blades. The turbine blades are attached to the top of the input shaft, the bottom of this shaft is connected to the inside of a sealed, planetary gearhead which then turns the body in the horizontal plane and the nozzles in the vertical plane.

Planetary Gearhead: The sealed planetary gearhead has an external casing made of steel, surface-anodized to become stainless. This sealed gearhead is located inside the gearbox, which itself is sealed, and thus does not require any lubricant. All internal parts are hardened sintered steel, the end caps and output shaft are stainless steel.

Lubricant: A Food grade lubricant is inside the sealed gearhead casing. No customer-supplied or user-maintained lubricant is needed.

Warranty: Gamajets are warranted for eighteen months from the date of shipment against any defects in workmanship or materials. Normal maintenance parts such as O-rings and bearings and are not included under this warranty, nor is damage caused by dropping, use of destructively corrosive fluids, or other abuse. This warranty shall not apply to any malfunction resulting from use of non-Gamajet replacement parts purchased from any source other than Gamajet or an authorized Gamajet distributor. For full details, see Gamajet “Terms and Conditions of Sale.”


Benefits:

Light-weight, compact large tank cleaner.

Powerful: 40lbs (18 kg) of cleaning force at 25’ (7.5 m)

Reliable, non-clogging, durable design

Directional option

 

Product Data Sheet Download

Resources:

Engineering Diagrams

Performance Charts

Gamajet GentleJET

Footer Navigation

Copyright & Privacy

  • GAMAJET, part of the Alfa Laval Group