Global Quicklinks

NANOJET 2.0 Flow-through Technical Data

Operating Range:

Pressure:  20 to 300 PSI (1.38 to 20.68 bar) 

Temperature: 0° to 200°F (0° to 93°C)

Flow Rate: 5 to 30 GPM (19 to 114 l/min) 

Cleaning Radius: 5' (1.5 Meters)

Wash Cycle Time: 4-20 Minutes

Impact: 7 lbs (3 kg) at 5' (1.5 m)

Overall Dimensions:

Height: 20" (508 mm)  

Custom lengths available

Body Diameter: 1.822" (46.2788 mm)

Weight: 5.5 lb (2.5 kg)

Clearance:1.87" (47.498 mm)


Other Specifications: 

Inlet Connection: 1" or 1.5" Tri-Clover

Construction/Design: Parts are machined from 316-L Stainless Steel investment castings or bar stock.
Impeller & Final Shaft: For increased wear resistance, the input shaft is plasma-sprayed with a Chromium Oxide coating on Stainless Steel.

Shaft & Gearbox Bushings: Turbine shaft thrust is absorbed by a Tungsten carbide bushing. Gear bushings are carbon filled polyphenylene sulfide.

Static Seals: O-Ring materials are selected for each application. EPDM is standard with Kalrez and Viton available. Other materials can be supplied on special order.

Dynamic Seals and Bearings: Rotary shaft and housing seals/bearings are made of PTFE and PPS.They are reinforced for extra long wear and protection against leakage, abrasion and deposit build-up.

Nozzles: Nozzle sizes from 0.100" (2.54 mm) to 0.200" (5.08 mm)

Drive Mechanism: The wash fluid enters the Gamajet at the inlet collar where it encounters and spins turbine blades. The turbine blades are attached to the top of the drive or rotor shaft. The bottom of this shaft is connected to the inside of a, robust planetary gearhead which then turns the body in the horizontal plane and the nozzles in the vertical plane.

Planetary Gearhead: Comprised of all stainless components. 316 stainless steel and 17-4 heat treated stainless components.

Lubricant: None.

Operating & Maintenance: Complete operating and maintenance procedures are covered in a detailed instruction manual furnished with all machines. Ready availability of spare parts or kits, and ease of on-site maintenance minimizes the need for repairs. Prompt factory overhaul or repair service is always available. Replacement parts are stocked year round. Special 24-48 hour delivery available upon request at no extra charge.

Warranty: Gamajets are warranted for eighteen months from the date of shipment against any defects in workmanship or materials. Normal maintenance parts such as O-rings, bearings, bushings, and seals are not included under this warranty, nor is damage caused by dropping, use of destructively corrosive fluids, or other abuse.This warranty shall not apply to any malfunction resulting from use of non-Gamajet replacement parts purchased from any source other than Gamajet or an authorized Gamajet distributor. For full details, see Gamajet “Terms and Conditions of Sale”.

Product Data Sheet Download Request a Quote

Benefits:

Sanitary design
Fits through a 2” standard sanitary fitting
Operates at low pressures
Deionized water-resistant

 

INDUSTRIES:

Pharmaceutical
Personal Care
Food and Beverage
Dairy
Brewing

Gamajet GentleJET

Footer Navigation

Copyright & Privacy

  • GAMAJET, part of the Alfa Laval Group